Product Category
HUILI Injection Molding Machine
Clamp tonnage : 260 ton
Parameters:
MODEL machine | HL-2600 | ||
INJECTION UNIT | A | B | |
Screw diameter | mm | 54 | 56 |
Shot size(theoretical) | Cm³ | 720 | 770 |
Shot weight | g | 650 | 690 |
Injection pressure | Mpa | 190 | 178 |
Injection rate | g/s | 200 | 215 |
Screw L/D ratio | L/D | 22.5 | 21.6 |
Screw speed | r.p.m | 0-180 | |
Nozzle Diameter | Srmm | 20 | |
CLAMPING | |||
Clamp tonnage | KN | 2600 | |
Toggle stroke | mm | 530 | |
Mould Thickness | mm | 200-550 | |
Space between tie-bars | mm | 554X554 | |
Ejector stroke | mm | 160 | |
Ejector tonnage | KN | 70 | |
Ejector number | Piece | 9 | |
Hole Diameter | mm | 160 | |
By the way , Our company is about 110 km away from Shanghai(1.5 hour bus driving from shanghai airport) . Warmly welcome you to visit our factory at any time.
For choosing proper machine and saving your time, please read below questions carefully and send your inquiry soon , thanks .
1.what material you will use(PP PE or PET ?)
2.weight for plastic product
3.pictures for plastic product (including dimension for plastic product)
4.what output per hour do you need ?
5.Other requirements about the machine you want.
