Product Category
Extrusion blow moulding machines. A wide variety of materials can be used for the machine, which are suitable for producing multi-type products in small batches. The clamping system is a high-precision single-station linear guide, extrusion system using a hard gear reducer and inverter imported from Japan.The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.
Technical data:
Unit | Item | Specification | |
Machine type | HL82 | Accumulator head | |
Extruding unit | max. container capacity | 20 | L |
screw diameter | 82 special for PC | mm | |
screw L/D ratio | 25/30:1 | L/D | |
screw speed | 10～80 | rev./min | |
plasticizing capacity | 90 | kg/h | |
number of heating zone | 5 | zone | |
extruder heating power | 30 | kw | |
extruder driving power | 45 | kw | |
Die head | max accumulator capacity | 1.85 | L |
max injection speed | 1 | kg/sec | |
max head tooling diameter | 80-130 | mm | |
die head heating zone | 4 | zone | |
die head heating power | 19 | kw | |
Clamping unit | platen valid size(w×h) | 800×800 | mm |
platen daylight | 250～800 | mm | |
clamping force | 190 | kn | |
Bottom blowing unit (optional) | expansion stroke | 140～350 | mm |
blow pin auto-lifting stroke | 100 | mm | |
blow pin manual-lifting stroke | 200 | mm | |
Robot arm (optional) | moving stroke | 1000 | mm |
Machine frame | lifting stroke | 350 | mm |
lifting speed | 30 | mm/min | |
Hydraulic system | main-pump rated pressure | 12 | mpa |
main-pump rated volume | 180 | L/min | |
hydraulic driving power | 45 | kw | |
parison control hydraulic servo system | optional | ||
Rated volume | 23 | L/min | |
hydraulic pump power | 4 | kw | |
Pneumatic system | max. pressure | 8 | kg/cm2 |
operating pressure | 0.6 | mpa | |
air consumption | 0.6-0.8 | m3/min | |
Water source | water supply pressure | 0.3 | mpa |
Electricity | Voltage | AC380±10% | V |
Frequency | 50 | HZ | |
Phase | 3 phase 4 wire | ||
Installation capacity | total rated power | 120 | kw |
average consumption | 53 | kw/h | |
total weight | 11 | ton | |
dimension(L×W×H) | 5600×2700×4500 | mm | |
Machine photo
