Extrusion blow moulding machines. A wide variety of materials can be used for the machine, which are suitable for producing multi-type products in small batches. The clamping system is a high-precision single-station linear guide, extrusion system using a hard gear reducer and inverter imported from Japan.The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.
plastic extrusion blow molding machine
1. Basic Specification
l Die head: vertical type advanced structure.
l Extrusion system: adopting imported automatic temperature control device, hardened gear box and imported frequency convertor control screw speed to reach motor stepless speed regulation.
l Clamping system: adopting stable liner guide way device.
l Blowing device: adjustable upper and down blowing needle device.
l Parison control: Jeffren or MOOG wall thickness control system
l Hydraulic system: the full set of hydraulic system adopts imported components, using proportional control loop.
l Electric system: adopting full set programmable controller(Japan) and world famous electric parts.
2. Parameters
Specifications | Units | Single stationHL60 |
Material |
| PE.PP.PA...... |
Max container capacity | L | 5 |
Number of die | set | 1 |
Output(Dry Cycle) | Pc/hr | 700 |
Machine dimension(L×W×H) | M | 3.0*1.7*2.4 |
Total weight | ton | 3.5 |
Clamping unit |
|
|
Clamping force | KN | 65 |
Platen opening stroke | mm | 164-524 |
Platen size | mm | 320*380 |
Max mould size(W×H) | mm | 380*390 |
Mould thickness | mm | 153-320 |
Power |
|
|
Max drive | KW | 26 |
Total power | KW | 34 |
Fan power for screw | KW | 0.08*3 |
Air pressure | Mpa | 0.6 |
Air consumption | m³/min | 0.6 |
Average energy consumption | KW | 20 |
Extruder unit |
|
|
Screw diameter | mm | 60 |
Screw L/D ratio | L/D | 24 |
Plasticizing capacity | Kg/hr | 65 |
Number of heating zone | zone | 3 |
Extruder heating power | KW | 7.2 |
Extruder driving power | KW | 15 |
Die-head |
|
|
Number of heating zone | Zone | 3 |
Power of die heating | KW | 2.5 |
Max die pin diameter | mm | 140 |
Center distance of double die | mm | 150/160 |