Product Category
Extrusion blow moulding machines. A wide variety of materials can be used for the machine, which are suitable for producing multi-type products in small batches. The clamping system is a high-precision single-station linear guide, extrusion system using a hard gear reducer and inverter imported from Japan.The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.
plastic extrusion blow molding machine
Die head system: 1 layer single diehead, 2 layer double diehead, 2 layer diehead with view stripe by centre feeding of out layer. Trible diehead. 3 layer, 4 layer, 5 layer, 6 layer diehead |
Extrusion system: Hard gear surface decelerator + Japan invertor |
Hydraulic system: Japan hydraulic valve seal and proportional control |
Electric system: Japan PLC interface + PLC temperature control |
Specifications | Units | HL50-2L |
Material | PE.PP.ABS... | |
Max container capacity | L | 2 |
Output(Dry cycle) | Pc/hr | 700 |
Machine dimension(L*W*H) | M | 3*1.7*2.3 |
Total weight | Ton | 3 |
Clamping unit | ||
Clamping force | KN | 40 |
Platen opening stroke | mm | 138~368 |
Platen size | mm | 300*320 |
Max mould size(W*H) | mm | 300*320 |
Mould thickness | mm | 150~210 |
Power | ||
Max drive | KW | 16.5 |
Total power | KW | 22 |
Fan power for screw | KW | 0.08*3 |
Air pressure | Mpa | 0.6 |
Air consumption | m³/min | 0.4 |
Average energy | KW | 12 |
Motor power for pumps | KW | 5.5 |
Extruder unit | ||
Screw diameter | mm | 50 |
Screw L/D ratio | L/D | 24 |
Plasticsing capacity | Kg/hr | 35 |
Number of heating power | Zone | 3 |
Extruder heating power | KW | 4.2 |
Extruder driving power | KW | 11 |
Die-head | ||
Number of heating zone | Zone | 3 |
Power of die heating | KW | 1.8 |
Max die pin diameter | mm | 100 |
Center distance of die | mm | 80 |
