Product Category
Extrusion blow moulding machines. A wide variety of materials can be used for the machine, which are suitable for producing multi-type products in small batches. The clamping system is a high-precision single-station linear guide, extrusion system using a hard gear reducer and inverter imported from Japan.The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.
It is suitable for producing plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Beverage bottle, cosmetic bottle, medicine bottle, jar,drum ,Tool kit , plastic model etc.
plastic extrusion blow molding machine
Machine Feature:
1.Control Unit: Japan Mitsubishi PLC programmable controller and Taiwan HITECH touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2.Hydraulic Unit: It adopts international famous Japan YUKEN brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3.Extrusion Unit: Hard gear surface decelerator; famous HFinverter inverter adopts Italian technology; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating
4.Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable. This die head adopts German technology and is made by special imported steel.
5.Clamping Unit: Adopts fixed mould open-closing system,fast and balanced.
6..Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick, stable.
8. Electrical Components: All of the electrical components are made in Japan and Taiwan.
2. Parameters
Specifications | Units | |
Material | PE.PP.PA...... | |
Max container capacity | L | 5 |
Number of die | set | 1 |
Output（Dry Cycle） | Pc/hr | 700 |
Machine dimension（L×W×H） | M | 3.0*1.7*2.4 |
Total weight | ton | 3.5 |
Clamping unit | ||
Clamping force | KN | 65 |
Platen opening stroke | mm | 164-524 |
Platen size | mm | 320*380 |
Max mould size（W×H） | mm | 380*390 |
Mould thickness | mm | 153-320 |
Power | ||
Max drive | KW | 26 |
Total power | KW | 34 |
Fan power for screw | KW | 0.08*3 |
Air pressure | Mpa | 0.6 |
Air consumption | m³/min | 0.6 |
Average energy consumption | KW | 20 |
Extruder unit | ||
Screw diameter | mm | 60 |
Screw L/D ratio | L/D | 24 |
Plasticizing capacity | Kg/hr | 65 |
Number of heating zone | zone | 3 |
Extruder heating power | KW | 7.2 |
Extruder driving power | KW | 15 |
Die-head | ||
Number of heating zone | Zone | 3 |
Power of die heating | KW | 2.5 |
Max die pin diameter | mm | 140 |
Center distance of double die | mm | 150/160 |
